Festo - SFAM
Measuring multiple values
Because the SFAM is a pressure and flow sensor in one, machines need only one component to measure multiple values. By measuring compressed air pressure, flow and consumption, among others, the SFAM provides full insight into the compressed air system. This insight is the first step in a more economical, safe and sustainable system.
Insight into air consumption provides opportunities to optimise maintenance and save on energy. Many pneumatic components are subject to wear and tear. As a result, air consumption will increase over time. Data on consumption and performance of machines provide a clear picture of actions that can be taken to keep producing efficiently.
Consumption
Wherever components and parts move, there is friction. This friction produces wear, causing leaks to increase over time. Also, seals are never 100% airtight; this causes leaks, even at standstill. To gain insight into this, consumption is often measured over a short period of time.
To get a complete picture of air consumption, it is important not to include irrelevant data in the assessment.
Coffee breaks, tool changes or breakdowns?
All examples where the duration can vary and disrupt the data considerably.
The SFAM is the all-in-one sensor
Simple connection
Via IO-Link, data from SFAM can be easily collected and connected to other components and platforms.
Modular
SFAM is modular to fit into MS air conditioning platforms of new and existing machines.
![Jouw afbeelding](https://omnicontentimages.s3.eu-central-1.amazonaws.com/News/2024/Q2/NE2024Q2_Festo_SFAM_Image1.jpg)
Stay up to date with the latest news:
-
OBO Bettermann - Industrial solutionsRead moreOBO understands that it is essential to ensure efficiency and safety in industrial environments. OBO offers various products perfectly applicable in industry, such as the HoverCube, wiring duct LK4/LKV and chipping chute.
-
ABB - Ekip UPRead moreElectrification gives energy. This also applies to production sites and industrial environments. The factory of the future requires energy-efficient solutions. An example of such a solution is ABB's Ekip UP: a plug-and-play unit to upgrade and digitise low-voltage plant.
-
Stago - Defem mesh cable trayRead moreStago's Defem wire tray system meets the most demanding conditions, such as the heavy chemical, offshore or food industries.
-
Signify - The new Ledinaire EcoSet, Maxos Universal and CorLine Panel G6Read moreWith the holidays over and summer drawing to a close, the dark months are upon us. Philips has the new Ledinaire EcoSet (panel and waterproof), Maxos Universal and Coreline Panel G6 for good lighting in the dark days.
Check out our other success stories:
-
DigiFlow - Making Life Easier for CustomersRead moreTechnical services provider Breemes supplies customers with PLCs, drives and other materials. Customers like industrial automation company Digi-Flow. Turnover, both parties feel, is not the ultimate indicator of a good relationship. Coming up with solutions together and providing knowledge are equally important. Ultimately, Breemes has to make the customer’s life easier, Digi-Flow CEO Eric Decant believes. Antwerp-based Digi-Flow assists industrial companies in their transformation to smart industrial environments using industrial automation and digitalisation. The company is a spin-off from ESAS Automation in 2020. Solindus, now ESAS, had grown into a company with 2,000 employees after its founding in 2003 by Eric and Robert Decant. With Digi-Flow, they wanted to go back to small-scale entrepreneurship. Eric Decant is now the CEO of the company, which has 30-plus employees. ‘I’m still ambitious, but I don’t want to complete this kind of strenuous trajectory on such a large scale anymore.’ Meanwhile, he is grooming his son to take over the reins. This makes Digi-Flow a true family business, as reflected in its core values of co-creation, long-term vision, lifelong growth and personal.
-
ATR Engineering - Short delivery times for components and decisionsRead moreBeing able to shift gears quickly is crucial to the success of industrial automation projects. This refers not only to the delivery of components but also to decision-making. Short lines of communication are important here. That was the case in the project to control a washing line for plastic PET flakes, in which ATR Engineering and itsme teamed up closely. ‘The added value of our collaboration is being able to anticipate customer requests extremely quickly.’ Bringing ten years of experience in industrial automation to the table, Adrie van Triest started his own company in 2019. With a broad approach, ATR Engineering in Berkel-Enschot focuses on hardware and software engineering. ‘Our area of expertise is offering total solutions for industrial automation centred around the design of PLC controls. We will sit down with a customer to discuss pending automation issues and we will determine the needs and wishes for a project together in advance. We also offer flexible support for projects or commissioning.’ ATR Engineering is a small company currently employing four engineers from different disciplines. There is also a permanent ‘flexible shell’ of engineers and technicians available to help during peak periods.
-
Top Cold Control - Short lines for energy management and project collaborationRead moreSpecialist in industrial refrigeration Top Cold Control carries out complete projects, and energy management cannot be missing from that these days. This starts with a lot of measuring. For a cold store in Amsterdam, itsme, in consultation with Top Cold Control and the customer, designed a solution to integrate energy measurement in the control system. Top Cold Control from Nieuwkuijk, specialised in industrial refrigeration technology, realises large projects for customers in the Netherlands, Belgium, Germany and, through them, elsewhere in the world. These include refrigeration and freezer systems for slaughterhouses, processing companies, cold stores and transport companies. Top Cold Control can handle all common refrigerants, but specialises in the use of the natural refrigerants ammonia (NH3) and carbon dioxide (CO2). For fast freezing, Top Cold Control supplies advanced, energy-efficient freezing tunnels. "The company stands out for its short lines of communication," says operations manager Arjan Maas. "We are always accessible and customers immediately get the right person on the line with us."
-
Dymotec - Open Lines in a ‘Perfect Storm’Read moreCOVID-19 and global component scarcity threw the industry into a ‘perfect storm’. Industrial automator Dymotec and Breemes kept the phone lines constantly open to tackle the scarcity problem together with creativity and proactivity. Dymotec in Olen (B) focuses on industrial automation spanning a broad spectrum of industries, from food and pharma to logistics and metal. The company has been around for 30 years and joined the Jeco Energies Group in 2022. Dymotec now has some 50 employees and also has a flexible shell with technicians, programmers and project engineers. Ever since its establishment, the company from Kempen has had a relationship with (the predecessors of) Breemes.
Why not take a look at these trainings we offer:
-
TIAP-NETWORKRead moreavailable in Dutch
-
FREQ-FC300 - Danfoss Frequency Converters FC300Read moreThe workshop provides information on the design, commissioning and maintenance of the FC 300 frequency converter and its applications.
-
SE-FREQ-Altivar - Schneider Electric Altivar frequency converterRead moreThe participant is able to project, detect and correct errors in the entire application of frequency converters in the building for HVAC applications, for example heating and ventilation. You will also learn: to operate behavior of the three-phase asynchronous motor, the mechanics of the drive, harmonic and cos phi, the technology of the frequency converters Altivar 212 and more.
-
VDE Meassuring course - Measuring course according to VDE-RegulationsRead moreMeasurement course on the VDE regulations.