Stago Defem - The wire tray for demanding conditions
Stago's Defem wire tray system meets the most demanding conditions, such as the heavy chemical industry, offshore or the food industry. Defem is part of the wide product range that cable tray manufacturer Stago carries from the Wibe Group in the Netherlands. The system is quick to assemble, versatile, safe, high quality, strong and economical.
Fast assembly
You are busy, so the system is designed to take very little time to install. In as little as 30 seconds you can make a connection with key 10. In addition, the Defem cable tray system from Stago includes various screwless accessories.
Widely applicable
Special profiles have been developed for the food industry, making Defem suitable for a variety of applications. C, G and Z profiles keep cables protected, accessible and easy to clean (also according to HACCP). Dimensions are available from 30mm to 622mm width and the mini wire tray is available for mounting in the smallest spaces.
Safety first
The system meets the most important safety requirements:
- E30 and E90 certified fireproof, so function retention of up to 90 minutes at extremely high temperatures according to the DIN 4102-12 guideline.
- Suitable for equipotential bonding according to IEC 61537, 11:1 and DIN VDE 0100 standards.
- Tensilock lock bolts and nuts ensure correct force on couplings.
- Resistant to vibration according to EN50155 standardization due to self-locking properties.
Solid & high quality
Stago's Defem wire tray is known for its sturdiness and load-bearing capacity. Loads up to 200kg/meter are possible. And the standard thicker wire diameters starting at 5mm makes the wire tray 56.25% stronger than a 4mm wire diameter. Five meters of span is possible without support and the load capacity is the same at every point of the span. Quality is guaranteed by strict quality control at the factory. Moreover, there is no corrosion thanks to gas-free connection in the couplings.
Stago, meters ahead in cable support systems.
Check out our other success stories:
-
DigiFlow - Making Life Easier for CustomersRead moreTechnical services provider Breemes supplies customers with PLCs, drives and other materials. Customers like industrial automation company Digi-Flow. Turnover, both parties feel, is not the ultimate indicator of a good relationship. Coming up with solutions together and providing knowledge are equally important. Ultimately, Breemes has to make the customer’s life easier, Digi-Flow CEO Eric Decant believes. Antwerp-based Digi-Flow assists industrial companies in their transformation to smart industrial environments using industrial automation and digitalisation. The company is a spin-off from ESAS Automation in 2020. Solindus, now ESAS, had grown into a company with 2,000 employees after its founding in 2003 by Eric and Robert Decant. With Digi-Flow, they wanted to go back to small-scale entrepreneurship. Eric Decant is now the CEO of the company, which has 30-plus employees. ‘I’m still ambitious, but I don’t want to complete this kind of strenuous trajectory on such a large scale anymore.’ Meanwhile, he is grooming his son to take over the reins. This makes Digi-Flow a true family business, as reflected in its core values of co-creation, long-term vision, lifelong growth and personal.
-
ATR Engineering - Short delivery times for components and decisionsRead moreBeing able to shift gears quickly is crucial to the success of industrial automation projects. This refers not only to the delivery of components but also to decision-making. Short lines of communication are important here. That was the case in the project to control a washing line for plastic PET flakes, in which ATR Engineering and itsme teamed up closely. ‘The added value of our collaboration is being able to anticipate customer requests extremely quickly.’ Bringing ten years of experience in industrial automation to the table, Adrie van Triest started his own company in 2019. With a broad approach, ATR Engineering in Berkel-Enschot focuses on hardware and software engineering. ‘Our area of expertise is offering total solutions for industrial automation centred around the design of PLC controls. We will sit down with a customer to discuss pending automation issues and we will determine the needs and wishes for a project together in advance. We also offer flexible support for projects or commissioning.’ ATR Engineering is a small company currently employing four engineers from different disciplines. There is also a permanent ‘flexible shell’ of engineers and technicians available to help during peak periods.
-
Top Cold Control - Short lines for energy management and project collaborationRead moreSpecialist in industrial refrigeration Top Cold Control carries out complete projects, and energy management cannot be missing from that these days. This starts with a lot of measuring. For a cold store in Amsterdam, itsme, in consultation with Top Cold Control and the customer, designed a solution to integrate energy measurement in the control system. Top Cold Control from Nieuwkuijk, specialised in industrial refrigeration technology, realises large projects for customers in the Netherlands, Belgium, Germany and, through them, elsewhere in the world. These include refrigeration and freezer systems for slaughterhouses, processing companies, cold stores and transport companies. Top Cold Control can handle all common refrigerants, but specialises in the use of the natural refrigerants ammonia (NH3) and carbon dioxide (CO2). For fast freezing, Top Cold Control supplies advanced, energy-efficient freezing tunnels. "The company stands out for its short lines of communication," says operations manager Arjan Maas. "We are always accessible and customers immediately get the right person on the line with us."
-
Dymotec - Open Lines in a ‘Perfect Storm’Read moreCOVID-19 and global component scarcity threw the industry into a ‘perfect storm’. Industrial automator Dymotec and Breemes kept the phone lines constantly open to tackle the scarcity problem together with creativity and proactivity. Dymotec in Olen (B) focuses on industrial automation spanning a broad spectrum of industries, from food and pharma to logistics and metal. The company has been around for 30 years and joined the Jeco Energies Group in 2022. Dymotec now has some 50 employees and also has a flexible shell with technicians, programmers and project engineers. Ever since its establishment, the company from Kempen has had a relationship with (the predecessors of) Breemes.
Why not take a look at these trainings we offer:
-
TIAP-NETWORKRead moreavailable in Dutch
-
PCS7-PRO v9Read moreavailable in Dutch
-
PROFIBUS-INSTRead moreavailable in Dutch
-
PROFINET-INSTRead moreavailable in Dutch