text.skipToContent text.skipToNavigation

Schneider Electric - NEW ATV320 as  IP6X Version


Schneider Electric has expanded its range of Altivar 320 frequency converters with a version with increased IP protection (dust and water) especially developed for placement (decentral) in the installation close to the motor.
You can choose from a version with (IP65) or without (IP66) integrated main switch. Both versions also offer the possibility to adjust the front panel of the controller by integrating control and signalling units into the 2 freely available 22 mm recesses.
With this expansion, the Altivar Machine ATV320 family offers a complete range of IP20 and IP6X frequency converters for single- and three-phase synchronous and asynchronous motors.
Simplified integration thanks to the availability of three types of construction:
​​​​​​​
  • ATV320 Compact: designed for integration into the machine frame
  • ATV320 Book: designed for optimal use of cupboard space
  • ATV320 IP65 / 66: designed for dust-proof and water-resistant applications
 
SE Altivar (1).png
The Altivar Machine ATV320 series are robust, easy to use and easy to integrate into commonly used automation architectures and different types of control cabinets.
The Altivar Machine ATV320 series  are known for reliable motor control for asynchronous and synchronous motors and outstanding performance with a simple plug-and-play setting.
This results in:
  • Unrivalled flexibility
  • Advanced connection via different networks, based on Ethernet (Modbus TCP, Ethernet / IP, Profinet, EtherCAT) or serial (Modbus RTU, CANopen, Profibus DP, DeviceNet).
  • Optimum performance of your machine
  • Extended availability of your machine

Continuity of your machine is the result of the robust design. The PCBs are class 3C3 coated according to IEC 61721-3-3, to protect against corrosion in harsh environmental conditions. The frequency converter is suitable for continuous operation at an ambient temperature of up to 60 ° C.


​​​​​​​Optimum machine safety

Integrated safety functions for simple application requirements such as Safe Torque Off (STO) and full control functions including Safe Stop 1 (SS1), Safe Limited Speed ​​(SLS), Safe Maximum Speed ​​(SMS) and Guard Door Locking (GDL). These functions comply with the Machinery Directive 2006/42 / EC and ensure a simplified certification of your machine.
​​​​​​​


Broad assortment

​​​​Of course, we support you with our broad product assortment. A selection of these products you see below. A total overview of all Schneider Electric products form the serie Altivar you will find here. To directly go to an overview of one of the series, please click on one of the links below.

You might also be interested in this:

Schneider Electric XIOT
The Internet of Things is the extension of the Internet to connected devices. Telemecanique Sensors offers a wireless solution to collect data from remote equipment and use this data, via the Internet, on a PC or mobile device. The XIOT Cloud connected switch from Telemecanique Sensors is based on LPWAN \(low power wide area network\) technology, operated by Sigfox. The Sigfox network covers 32 countries and is already very extensive in Europe. It is also being rapidly deployed in the US and Asia-Pacific. It uses antennas with a range of around 50 km. The map on the Sigfox website shows exactly which areas are covered by the Network.
Read further
Schneider Electric Lexium 32i
With servo motor and servo drive integrated in one housing, the Lexium32i is designed for application areas requiring high precision and advanced motor control.
Read further
Schneider Electric Lexium 32
The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15 to 11 kW and the servo motor ranges BMH and BSH series
Read further
Schneider TeSys
Digital multifunctional load management solution up to 80A. TeSys island is designed to switch, protect and manage motors and other electrical loads up to 80Amps: AC3, in an electrical control panel.
Read further

Check out our other success stories:

  • TESTIMONIAL
    7 okt. 2024
    Bright Renewables - From Webinar to an Actual Predictive Maintenance Project
    Under the header “FastForward”, itsme supports product improvement and process acceleration, including by informing customers about time-saving solutions and smart technologies. For example, in spring 2023, a webinar on predictive maintenance was organised in collaboration with KIM Plus Delta, consultants for asset and maintenance management. Bright Renewables’ participation resulted in an actual predictive maintenance project for Bright's green gas plants.
    Read more
  • TESTIMONIAL
    3 okt. 2024
    Signaal 64 - Boon Edam - Toegang tot VMI en een groot assortiment
    Boon Edam, known for its revolving doors and turnstiles, picked itsme as their main electrical components supplier last year. The large product range and the vendor managed inventory (VMI) solution for the grab stock of electrical assembly materials were the deciding factors. “When you install VMI, you actually do it forever.”
    Read more
  • TESTIMONIAL
    2 okt. 2024
    Sissing Noord - Commissioning Frequency
    Sissing Noord in Leek (Groningen) is an expert in the maintenance, renovation and construction of “wet” infrastructure, like movable bridges, pumping stations and locks. For the drives of these structures, itsme supplies the speed drives and, where necessary, also the technical know-how. For projects where Sissing Noord needs this knowledge, specialist itsme offers “some relief”.
    Read more
  • TESTIMONIAL
    1 okt. 2024
    Connected Business - Vendor Managed Inventory
    The Lean improvement method distinguishes eight waste categories. One of these is 'inventory'. Too much stock is not good, but neither is too little. After all, having stock also provides the safe feeling of availability in times of uncertain internal planning and external factors that cannot be directly influenced. Because optimising availability both in one's own company and in the supply chain is often not the core competence of our customers, itsme can take over the care of such optimisation, for example through the import and management of so-called Vendor Managed Inventory systems. But, how do you know whether VMI is indeed the right solution? Ralph van Aartsen can answer that crucial question - using five questions. Here, in advance, are his answers to our questions on VMI.
    Read more

Why not take a look at these trainings we offer: