text.skipToContent text.skipToNavigation

Schneider XIOT

Cloud connected sensor XIOT range For remote device monitoring


The Internet of Things: IoT, is the extension of the Internet to connected devices. Telemecanique Sensors offers a wireless solution to collect data from remote equipment and use this data, via the Internet, on a PC or mobile device. The XIOT Cloud connected switch from Telemecanique Sensors is based on LPWAN :low power wide area network, technology, operated by Sigfox. The Sigfox network covers 32 countries and is already very extensive in Europe. It is also being rapidly deployed in the US and Asia-Pacific. It uses antennas with a range of around 50 km. The map on the Sigfox website shows exactly which areas are covered by the Network. 

When the contacts on a switch installed on your site change state, the transmitter sends a message to the IoT network (LPWAN) , which is then routed to our secure servers . This message is then delivered to one or more recipients as an alert on PC, tablet, or smartphone.
​​​​​​​For areas without electricity or difficult-to-access areas The XIOT Cloud connected switch is used to signal a significant or abnormal change of state on your devices.
​​​​

Agricultural applications 

  • Irrigation systems (pressure threshold monitoring) 

  • Buildings and hoisting equipment (hatch and door positions) 

  • HVAC 


Water treatment applications (pumping, tank monitoring) 

  • ​​​​​​​Water treatment plants 

  • Valves 

  • Flood gates


​​​​​​​Mining and quarrying applications (Emergency stop monitoring) 

  • Conveyors

XIOT picture1.jpg​​​​​​​
​​​​​

You might also be interested in this:

Schneider Electric Lexium 32
The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15 to 11 kW and the servo motor ranges BMH and BSH series
Read further
Schneider Electric Lexium 32i
With servo motor and servo drive integrated in one housing, the Lexium32i is designed for application areas requiring high precision and advanced motor control.
Read further
Schneider TeSys
Digital multifunctional load management solution up to 80A. TeSys island is designed to switch, protect and manage motors and other electrical loads up to 80Amps: AC3, in an electrical control panel.
Read further
Schneider Electric ATV320 IP6X
Continuity of your machine is the result of the robust design. The PCBs are class 3C3 coated according to IEC 61721-3-3, to protect against corrosion in harsh environmental conditions. The frequency converter is suitable for continuous operation at an ambient temperature of up to 60 ° C.
Read further

Check out our other success stories:

  • TESTIMONIAL
    7 okt. 2024
    Bright Renewables - From Webinar to an Actual Predictive Maintenance Project
    Under the header “FastForward”, itsme supports product improvement and process acceleration, including by informing customers about time-saving solutions and smart technologies. For example, in spring 2023, a webinar on predictive maintenance was organised in collaboration with KIM Plus Delta, consultants for asset and maintenance management. Bright Renewables’ participation resulted in an actual predictive maintenance project for Bright's green gas plants.
    Read more
  • TESTIMONIAL
    3 okt. 2024
    Signaal 64 - Boon Edam - Toegang tot VMI en een groot assortiment
    Boon Edam, known for its revolving doors and turnstiles, picked itsme as their main electrical components supplier last year. The large product range and the vendor managed inventory (VMI) solution for the grab stock of electrical assembly materials were the deciding factors. “When you install VMI, you actually do it forever.”
    Read more
  • TESTIMONIAL
    2 okt. 2024
    Sissing Noord - Commissioning Frequency
    Sissing Noord in Leek (Groningen) is an expert in the maintenance, renovation and construction of “wet” infrastructure, like movable bridges, pumping stations and locks. For the drives of these structures, itsme supplies the speed drives and, where necessary, also the technical know-how. For projects where Sissing Noord needs this knowledge, specialist itsme offers “some relief”.
    Read more
  • TESTIMONIAL
    1 okt. 2024
    Connected Business - Vendor Managed Inventory
    The Lean improvement method distinguishes eight waste categories. One of these is 'inventory'. Too much stock is not good, but neither is too little. After all, having stock also provides the safe feeling of availability in times of uncertain internal planning and external factors that cannot be directly influenced. Because optimising availability both in one's own company and in the supply chain is often not the core competence of our customers, itsme can take over the care of such optimisation, for example through the import and management of so-called Vendor Managed Inventory systems. But, how do you know whether VMI is indeed the right solution? Ralph van Aartsen can answer that crucial question - using five questions. Here, in advance, are his answers to our questions on VMI.
    Read more

Why not take a look at these trainings we offer:

Take a look at these promotions: