Siemens - Sirius ACT RFID selector switch for improving plant performance
The availability of machines and plants also depends on the personnel who operate and maintain them. Analyses of user data harbor optimization potential for productivity. Within the portfolio of Siemens Sirius ACT pushbuttons and signal elements is developed a selector switch based on RFID technology. The switch uses this technology to assign access rights contactlessly.
User groups with different plant authorizations
In industrial plants, numerous different authorizations are required for switch-on. For example, a service technician must have different authorizations than an operator. For example, to access a touch panel without a password or assign various switching authorizations. The latter is currently still often done using conventional mechanical key switches. However, these can become contaminated by water and dirt. With an RFID selector switch, there is no mechanical contact 
between switch and stick. The stick contains a so-called tag that is read by the transmitter in the switch.
About four standard colored sticks with unique tag indicate the different authorization levels and a fifth that is self-programmable using IO-link software. Another advantage is that the authorization levels of an RFID stick can be adjusted. And if a stick (tag) is lost, it can be blocked very easily. This feature also allows access to be restricted to certain times of the day.
Know exactly who is doing something on the machine and when
Which operator or mechanic was working on a machine and when can provide information about potential productivity improvements. This requires accurate tracking of who is authorized to access the machine. However, conventional methods such as physical logs provide the necessary information only to a limited extent and in analog form. Our RFID selector switches allow the recording of persons or functions and accurate documentation of machine access.
The following versions of the SIRIUS ACT RFID selector switch can be used:
- RFID Selector Switch with standard electronics module
- RFID Selector switch with pre-programmed (IO-Link) electronics module
- RFID Selector switch with freely programmable (IO-Link) electronics module
Stay up to date with the latest news:
-
Leuze - To the “PIN” point!Read moreIf you’re looking for solutions for a wide range of applications, Leuze is the right place for you. Whether it’s high precision or extreme environmental conditions like cleaning processes, deep-freeze environments, or high-speed switching sensors—Leuze always offers a fitting solution.
-
Legrand - TransformersRead moreWith transformers you bring the quality of your power up to standard. In Legrand's power distribution range you will find single-phase, open control and signaling transformers with capacities up to 8000VA.
-
Danfoss - Programming the iC2-MicroRead moreiC2-Micro is available with a high-speed adapter for PC programming even without mains power. This AC drive has Smart Logic Controller (SLC) for easy customization and is UL LZGH2/8 certified for use in systems with A2L refrigerants.
-
Legrand - Wire tray Fasclic+Read moreFASCLIC+ wire trays from Legrand are an innovative solution for installing wire trays, designed primarily for speed and ease of use. The wire trays feature an integrated snap coupling system, which means they can be installed without tools, even in tight spaces such as under ceilings or against walls.
Check out our other success stories:
Why not take a look at these trainings we offer:
-
TIAP-NETWORKRead moreavailable in Dutch
-
TIAP-OPC/UARead moreavailable in Dutch
-
TIAP-PanelsRead moreavailable in Dutch